2024 Virnig Manufacturing V60 Hydraulic Snow Blade/Pusher HSBP120

Information

2024 Virnig Manufacturing V60 Hydraulic Snow Blade/Pusher HSBP120

Industrial plow with independent blade and wing control for optimal snow removal.

Features may include:

  • FREE FLOATING DESIGN AUTOMATICALLY ADAPTS TO UNEVEN GROUND IN ALL DIRECTIONS WHILE ALLOWING FULL DOWN PRESSURE
  • DUAL HYDRAULIC CROSSOVER RELIEF VALVES PROTECT THE ATTACHMENT BY ANGLING THE BLADE UPON IMPACT
  • INDEPENDENTLY ANGLE EACH WING 60° & ANGLE THE BLADE 30° LEFT OR RIGHT, FROM INSIDE THE CAB
  • POSITION BLADE & WINGS AT ANY POINT BETWEEN THOSE SHOWN BELOW
  • TRIP EDGES ON MAIN BLADE & WINGS PROTECT OPERATOR & EQUIPMENT
  • REVERSIBLE, HARDENED MAIN EDGE & AR400 WING EDGES INCREASE DURABILITY & ALLOW 5 1/2" OF WEAR

Photos

Highlights

  • Lockwood, Missouri
  • 2024
  • Virnig Manufacturing
  • V60 Hydraulic Snow Blade/Pusher HSBP120
  • Available
  • At Full Angle, Both Wings Open: 110.0 Inches | At Full Angle, One Wing Open: 86.0 Inches | At Full Scoop: 96.5 Inches | Main Moldboard: 62.0 Inches

Specifications

  • 2024
  • Virnig Manufacturing
  • V60 Hydraulic Snow Blade/Pusher
  • HSBP120
  • Implement / Attachment
  • 0.19 Inches
  • Angle (Blade / Wing): +/- 30 / 60 Degrees | Blade Oscillation: +/- 4 Degrees | Float Link Angle: +/- 5 Degrees | Cylinder Pins: 1.25 Inches | Hinge Pins Diameter: 1.563 Inches
  • Straight: 124.5 Inches
  • At Full Angle, Both Wings Open: 110.0 Inches | At Full Angle, One Wing Open: 86.0 Inches | At Full Scoop: 96.5 Inches | Main Moldboard: 62.0 Inches
  • 31.0 Inches
  • Overall, Straight: 39.5 Inches
  • Cylinder: 2.0 Inches
  • Cylinder: 8.375 Inches
  • Main: 5/8 x 8 Inches Bolt-on | Wing: 1/2 x 7 3/4 Inches AR400, Bolt-on
  • Recommended: Greater than 1800 pounds
  • Approximate: 1540 Pounds