2024 SCAG Power Equipment SFC-21 SFC-21-7CV
- Year 2024
- Make SCAG Power Equipment
- Model SFC-21
- Engine Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
2024 SCAG Power Equipment SFC-21 SFC-21-7CV
2024 SCAG Power Equipment SFC SFC-21-5CV
THE BEST ON THE JOB OR AT HOME
The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.
Features may include:
EASY HEIGHT-OF-CUT ADJUSTMENT FINE-TUNED AND SIMPLE
- Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.
SCAG LEVEL QUALITY-OF-CUT PERFORMANCE FOR THE LONG HAUL
- li>Strong, stamped steel deck ensures years of worry-free performance and a consistent cut.
- li>Capable of 3-in-1 versatility, giving you the ability to mulch, bag or side-discharge. Mulching and bagging attachments come standard; side-discharge accessory is available.
BUILT TO LAST DEPENDABLE, WORRY-FREE PRODUCTIVITY
- li>Heavy-duty construction ensures years of dependable service and worry-free productivity.
Engine
Engine
Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
Engine Manufacturer
Kohler® Command PRO®
Starter
Easy-Pull™ recoil start
Engine Power
Horsepower: 7HP @ 3300 RPM
Displacement
224 cc
Cylinder Liners
One with cast-iron cylinder bore
Cooling System
air-cooled
Fuel Type
gas
Air Cleaner
Quad-Clean™ four-stage
Air Filter
cyclonic air filter
Exhaust
Front discharge muffler with guard
Drivetrain
Governor
Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm
Drive System
Transmission
Transmission
GT MG 512 transmission, 3-speed
Steering
Travel Control: Variable drive control bar and 3-speed selector lever on handlebar
Drive Shaft
0.50" diameter
Clutch
Type: Heavy-duty Blade Brake Clutch (BBC)
Wheels & Tires
Tires, Rear Specification
10.5 x 3
Tires, Front Specification
9 x 2.25
Operational
Top Speed
Forward: Up to 4.25 mph
Hydraulics
Pump Type
Oil: Steel oil pump; Full pressure lubrication with spin-on oil filter
Chassis
Deck Thickness
14 gauge
Dimensions
Dimensions
Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable | Cutter Blade: 0.1345 in. thick, milled edge, wear resistant
Length
Operating Position: 63.0 - 68.5" | Storage Position: 41"
Width
23.25"
Height
Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
Cutting Width
21 inches (53.34 cm)
Track Width
21.2"
Capacities
Fuel Capacity
1 gallon (3.785 liters) plastic tank
Weights
Weight
without bagger: 138 lb | with bagger: 143 lb
Features
Construction Material, Deck
14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.
Features
Safety Group: Handle actuated operator presence system