2024 SCAG Power Equipment Industrial Tow-Behind TLB25-49KBD

Information

2024 SCAG Power Equipment Industrial Tow-Behind TLB25-49KBD

LEAVE THE REST. GET THE BEST.

When the best demand the best, it’s time for the toughest and most powerful: the Scag® Industrial Tow-Behind Truck Loader. No matter the job—from landscaping and municipal operations to golf courses—this machine features the commercial-grade size and performance needed to get the job done. Leave the rest behind and work with the best.

Features may include:

4-Blade Impeller

FABRICATED AND BALANCED, 25-INCH, 4-BLADE IMPELLER

  • Within the unit’s 10.5"-wide housing is a welded-steel impeller with 1/2"-thick steel blades. Dynamically balanced for reduced vibration, longer life and less stress on the engine, these loaders boast an effective, high-output (35BV = up to 6,781 CFM; 37CH = up to 6,909 CFM; 49KBD = up to 7,318 CFM), debris-reducing design.

Smart Construction and Convenient Serviceability

EASY ACCESS FOR WEAR PLATE AND IMPELLER SERVICE

  • 1/4"-thick, bolt-in, replaceable wear liner extends service life. Removable rear-housing cover allows easy access to impeller and wear plates.

Locking Boom Arm and Intake Nozzle

SAFE AND CONVENIENT TRANSPORT

  • Transport lock safely secures the boom arm and hose when not in use; nylon bearing delivers smooth movement. A transport pin locks the nozzle to the loader to help protect the hose during transportation.

Ambidextrous Nozzle Handle

EASY HANDLING FROM EITHER SIDE: THE CHOICE IS YOURS

  • Padded, large-diameter handle is designed for increased leverage and easy maneuverability.

16" Steel Intake Nozzle

TAKE IT ALL IN

  • HUGE, replaceable intake nozzle makes debris pickup easy.

Adjustable Tongue and Hitch

FIT TO YOUR TRUCK – LONG OR SHORT, HIGH OR LOW

  • Choose from three different tongue lengths to best fit your specific application. A height-adjustable hitch gives the best fit your truck. A 2 5/16" ball coupler comes standard on gas-powered units, but will accept a pintle hitch. Diesel-powered unit comes with standard pintle hitch, but will accept a 2 5/16" ball coupler.

Built-In Tool Holder

KEEP YOUR RAKES, BROOMS AND SHOVELS WITHIN EASY REACH

  • Built-in, 3-hole tool holder with rubber rings protects handles from damage.

Large-Capacity Fuel Tank With Built-In Gauge

HOURS AND HOURS OF RUN TIME

  • High-capacity, 8.5-gallon, steel fuel tank with large filler neck for easy filling keeps you on the job. Built-in fuel gauge adds convenience and eliminates guesswork.

Ultra-Powerful Engine Options

HUGE POWER, UP TO 49 HP

  • Choose from a 35 hp Vanguard® BIG BLOCK™ or a 37 hp Kohler® Command PRO® EFI gasoline engine, or a 49 hp Kubota® diesel engine.

Photos

Highlights

  • Lockwood, Missouri
  • 2024
  • SCAG Power Equipment
  • Industrial Tow-Behind TLB25-49KBD
  • Tier 4 Compliant Kubota®, 4-cylinder, liquid-cooled, electric start
  • Available
  • Trailer: 66.75" | Impeller: 9" | Blower Housing: 10.5"
  • 121.25"

Specifications

  • 2024
  • SCAG Power Equipment
  • Industrial Tow-Behind
  • TLB25-49KBD
  • General
  • Tier 4 Compliant Kubota®, 4-cylinder, liquid-cooled, electric start
  • 49 HP
  • 205 / 75 D15 highway tires with steel wheels
  • Clear thermoplastic, 12" diameter, 84" length
  • Commercial-grade, all-steel mechanicals
  • All-steel, welded
  • 4-blade, 1/2"-thick blades, all-steel, welded | Mounting: Straight bore
  • Heavy-duty Dexter Torflex® axle (3,500 lb)
  • 25"
  • Trailer: 66.75" | Impeller: 9" | Blower Housing: 10.5"
  • 121.25"
  • 8.5 gallons
  • 2,300 lb
  • Highway Ready: Yes – standard roadside package, including wheel chocks and cones | Unit Mounting: Hitch: at least 10,000 lb rating | Blower Housing Wear Plates: Standard: 1/4"-steel, replaceable | Blower Housing Construction: Removable back panel for easy impeller and wear plate access | CFM Output: 7,318
  • plastic tank with built-in fuel gauge
  • 84" length, 16"-diameter intake hose, 0.045 blue polyurethane rubber, wire helix with wearstrip