2024 Rhino Ag Equipment Grading Scraper HDGS96

Information

2024 Rhino Ag Equipment Grading Scraper HDGS96

Level surfaces with a minimum number of passes.

Return your driveway or roadway to like new condition.

The Rhino grading scraper cuts material from high spots and deposits it in the low spots, leveling the surface. Available in widths of 60", 72", and 84", this scraper will fit your needs with a minimum number of passes over the surface.

Designed for economical use, the grading scraper only requires 30-50 HP, depending on model. Additionally, heat treated shanks with replaceable hardened tips that can rip down 2-3/8" are standard on every Rhino Grading Scraper!

The offset angled blades use 1/2" x 6" cutting edges that are reversible and replaceable for long life, and the 13-3/4" tall side panels allow for large volume movement of loose material. Full length replaceable wear skids are standard for long life in tough conditions!

WARRANTY

Industry-leading toughness. Industry-leading warranty.

Rhino products are built to take on whatever you can throw at them. But if something should break, you’ll be glad to know our warranties are just as strong. See your local Rhino dealer for complete details.

Features may include:
  • Smooths Gravel Driveways, Roadways, and Parking Lots Moving Material from High Spots to Low.
  • Two Replaceable, Offset Angle Blades for Longer Life.
  • CAT 1 Quick Hitch Compatible.
  • Tall Side Panels Move Lots of Material Without Leaving Spillage.

Photos

Highlights

  • Lockwood, Missouri
  • 2024
  • Rhino Ag Equipment
  • Grading Scraper HDGS96
  • Available
  • Box: 15 7/8''

Specifications

  • 2024
  • Rhino Ag Equipment
  • Grading Scraper
  • HDGS96
  • Graders/Grading Scrapers
  • Tractor: 90 hp -2WD / 72 hp- FWA
  • CAT 1 & CAT 2 QH
  • Side Panel Thickness: 3/16'' | Front Frame Beam: 4'' x 4'' x 3/8'' Wall | Rear Frame Beam: 4'' x 4'' x 1/4'' Wall | Skid Shoe: 1/2'' x 2- 1/2 x 52'' long | Cutting Edge Angle: 6 Degrees | Cutting Edge Spacing: 20 5/16''
  • 96''
  • 102''
  • 34 7/16''
  • 54 7/16''
  • Box: 15 7/8''
  • 1/2'' x 6'' bolt-on,replaceable,reversible heat treated
  • Approximate: 828 lbs.
  • Scarifier Shanks: 3/4'' x 2-1/2'' x 19 1/8'' 4 holes, Heat Treated Plow Point | Number of Shanks: 8